A 10×5 trailer measures 10 feet long by 5 feet wide — that is 3.05m x 1.52m, or 305cm x 152cm. Trailer sizes in Australia are quoted in feet, so the “10×5” refers to the floor of the trailer, not its overall length. Add roughly another 1.2m for the drawbar when you are working out whether it will fit in your driveway or garage.
10×5 trailer dimensions at a glance
| Floor length | 10ft — 3.05m — 305cm |
|---|---|
| Floor width | 5ft — 1.52m — 152cm |
| Floor area | About 4.6 square metres |
| Axle | Tandem (two axles) |
| Typical ATM | 2,000-2,800kg depending on build |
| Brakes | Required — well above the 750kg threshold |
Side and cage heights are quoted separately and vary by build. The exact ATM and tare for any trailer are on its compliance plate.
Converting trailer sizes from feet to metres
One foot is 0.3048 metres, or 30.48cm. So a 10×5 works out at 10 x 0.3048 = 3.05m long and 5 x 0.3048 = 1.52m wide. The same maths applies to every size: a 6×4 is 1.83m x 1.22m, an 8×5 is 2.44m x 1.52m, and a 12×6 is 3.66m x 1.83m. You can see them all side by side in our trailer sizes and dimensions chart.
What a 10×5 will carry
With around 4.6 square metres of floor and a tandem rating of 2,000-2,800kg ATM, a 10×5 sits in useful territory between the everyday box trailer and the big plant trailers:
- Moving house — lounge suites, whitegoods and bed frames in a single load rather than three.
- Building and landscaping — timber, pavers, bulk soil and mulch. Watch the weight rather than the space; dense materials hit the ATM long before the trailer looks full.
- Machinery and equipment — mowers, small excavators and bobcats, particularly with ramps fitted.
- Farm and property work — feed, fencing and general carting.
Remember that the ATM includes the trailer itself. To work out what you can actually load, subtract the tare from the ATM — our guide to how much weight a trailer can carry explains the maths.
Is a 10×5 the right size for you?
A 10×5 is a step up from the 8×5 and 9×5 tandems in length without becoming unwieldy to tow or store. Go smaller if your loads are occasional and light — a 6×4 or 7×5 single axle is cheaper, easier to park and does not need brakes. Go larger, to a 12×6 or a flat top, if you regularly carry long timber, machinery or oversized loads.
Because a 10×5 is well over 750kg ATM it must have brakes, and your tow vehicle needs the braked towing capacity to match. Check your handbook for the braked limit and the maximum towball download before you buy.
Galvanised for Australian conditions
Most of our tandem trailers are hot-dip galvanised. It costs a little more up front than paint, but it resists rust far better through wet winters, coastal air and constant loading, and it holds resale value. Keeping it clean is straightforward — see our guide to cleaning a galvanised trailer.
Built in Melbourne
U Beaut has been building trailers for around 30 years from our Seaford workshop, using steel from Bluescope in Braeside and Aussie-made components wherever we can. We build 10×5 tandems to order with cages, tipper kits and ramps, and we handle trailer repairs and servicing in-house.
Browse our tandem trailers, call the team on (03) 9708 2691, or get in touch and we will match a trailer to the loads you carry.
What size is a 10×5 trailer in metres?
A 10×5 trailer floor measures 3.05m long by 1.52m wide. Overall length is around 1.2m longer once the drawbar is included.
What is a 10×5 trailer in cm?
305cm x 152cm — that is 10 feet by 5 feet, since Australian trailer sizes are quoted in feet.
How do I convert trailer sizes from feet to metres?
Multiply by 0.3048. So 10ft = 3.05m and 5ft = 1.52m. One foot is 30.48cm.
How much can a 10×5 trailer carry?
A 10×5 tandem is typically rated 2,000-2,800kg ATM depending on the build. Subtract the trailer’s own weight (tare) from the ATM to get the usable payload — both figures are on the compliance plate.
Does a 10×5 trailer need brakes?
Yes. Brakes are required in Australia above 750kg ATM, and a 10×5 tandem is well above that. Your tow vehicle also needs the braked towing capacity to match.
Is a 10×5 bigger than an 8×5?
Yes — two feet longer. An 8×5 is 2.44m x 1.52m and a 10×5 is 3.05m x 1.52m. Both are 5ft wide, so the extra size is all length.
